3.5 KiB
C6 follow-up: completion is software duration plus repeat
Primary static recovery,2026-10-25; same hashed EXE/DLL identities as the core
camera/audio/UI report. checkpoint_voice_clock.py verifies12 DLL instruction
anchors,3 vtable targets and2 constants, emitting PE-mapped physical file offsets.
No original executable was run. This refines the earlier unresolved “voice status”
interpretation; it does not establish transport output or native timing fidelity.
Recovered call and field provenance
EXE47D890's channel slot14 is not a backend hardware-playing query. Both
DirectSound channel vtable10115420+14 (file115434) and WinSound channel
10116B3C+14 (file116B50), as well as base1011629C+14 (file1162B0), point to
DLL10071E40 (file71E40), exported OMediaSoundChannel::get_playing_sound_info.
Constructors1003AF58 and100F87DA install the respective derived tables.
10071E40 returns elapsed time through its first unsigned output and stored duration+1C through the second. If duration is zero both outputs become zero. When timer running (2C/2D clear), elapsed is engine millisecond clock100F8CF0 plus channel+28 minus channel+20; otherwise it uses frozen+24. At10071E7F..83 only elapsed > duration expires and clears duration+1C. Equality still reports nonzero duration. This is neither a DirectSound GetStatus result nor a speaker audibility check. The backend may query GetStatus in queue pumping, a different consumer from this slot14 predicate.
After successful play, DX1003B46E..482 and Win100F891A..92E compute channel+1C
from sound+44 using durationSeconds*1000 + .5 then integer conversion helper
10104E04. Constants10115450=1000 and10115448=.5. Exact conversion-mode semantics
of10104E04 and sound+44's decoder provenance still need a bounded follow-up;
do not assert PCM sample duration is always its bit-identical source.
Byte+30 is copied from the final boolean play argument: DX1003B32B reads it, 1003B338..343 turns it into the buffer's play flags,1003B46B stores it. Win 100F8893 selects flags2017/201F and100F8917 stores it. This is the repeat/loop flag, not a pending-start flag. DX stop1003B657 clears+30 and+1C; Win stop 100F898F/100F8996 does the same. DX queue pump1003B691 skips its ordinary queued advance when+30 is set. The interpretation is supported by matching play/stop/ queue branches in both backends; no original playback was observed.
Therefore EXE47D890's final predicate is structurally:
valid engine + in-range handle + existing channel
AND (software duration returned by slot14 != 0 OR channel repeat flag != 0)
Calling this “hardware voice status” would be an overclaim. The explicit bank, handle stop/release, failed play and engine timer pause still matter. The baseline port's prepared-file-duration clock is closer to the ordinary one-shot source clock than an SDL queue-empty predicate would be, but differs in integer boundary, source duration identity, pause/clock ownership, invalid handles and dispatch order.
Implementation consequence and remaining gate
Do not replace CAM/MCA completion with SDL queued bytes merely because source polls a handle. First model source channel state (duration milliseconds, elapsed, repeat, stop/invalid handle and engine clock pause), recover47D060 allocation/ play failure and source sound+44 derivation, then connect director completion to that state. Independent SDL transport can remain the output mechanism. Current duration/leftover-dt director behavior stays explicitly approximate until that contract is tested. This bounded correction changes the C6 plan, not gameplay yet.