62 lines
3.5 KiB
Markdown
62 lines
3.5 KiB
Markdown
# C6 follow-up: completion is software duration plus repeat
|
|
|
|
Primary static recovery,2026-10-25; same hashed EXE/DLL identities as the core
|
|
camera/audio/UI report. `checkpoint_voice_clock.py` verifies12 DLL instruction
|
|
anchors,3 vtable targets and2 constants, emitting PE-mapped physical file offsets.
|
|
No original executable was run. This refines the earlier unresolved “voice status”
|
|
interpretation; it does not establish transport output or native timing fidelity.
|
|
|
|
## Recovered call and field provenance
|
|
|
|
EXE47D890's channel slot14 is **not** a backend hardware-playing query. Both
|
|
DirectSound channel vtable10115420+14 (file115434) and WinSound channel
|
|
10116B3C+14 (file116B50), as well as base1011629C+14 (file1162B0), point to
|
|
DLL10071E40 (file71E40), exported `OMediaSoundChannel::get_playing_sound_info`.
|
|
Constructors1003AF58 and100F87DA install the respective derived tables.
|
|
|
|
10071E40 returns elapsed time through its first unsigned output and stored
|
|
duration+1C through the second. If duration is zero both outputs become zero.
|
|
When timer running (2C/2D clear), elapsed is engine millisecond clock100F8CF0
|
|
plus channel+28 minus channel+20; otherwise it uses frozen+24. At10071E7F..83
|
|
only **elapsed > duration** expires and clears duration+1C. Equality still reports
|
|
nonzero duration. This is neither a DirectSound GetStatus result nor a speaker
|
|
audibility check. The backend may query GetStatus in queue pumping, a different
|
|
consumer from this slot14 predicate.
|
|
|
|
After successful play, DX1003B46E..482 and Win100F891A..92E compute channel+1C
|
|
from sound+44 using `durationSeconds*1000 + .5` then integer conversion helper
|
|
10104E04. Constants10115450=1000 and10115448=.5. Exact conversion-mode semantics
|
|
of10104E04 and sound+44's decoder provenance still need a bounded follow-up;
|
|
do not assert PCM sample duration is always its bit-identical source.
|
|
|
|
Byte+30 is copied from the final boolean play argument: DX1003B32B reads it,
|
|
1003B338..343 turns it into the buffer's play flags,1003B46B stores it. Win
|
|
100F8893 selects flags2017/201F and100F8917 stores it. This is the **repeat/loop
|
|
flag**, not a pending-start flag. DX stop1003B657 clears+30 and+1C; Win stop
|
|
100F898F/100F8996 does the same. DX queue pump1003B691 skips its ordinary queued
|
|
advance when+30 is set. The interpretation is supported by matching play/stop/
|
|
queue branches in both backends; no original playback was observed.
|
|
|
|
Therefore EXE47D890's final predicate is structurally:
|
|
|
|
```text
|
|
valid engine + in-range handle + existing channel
|
|
AND (software duration returned by slot14 != 0 OR channel repeat flag != 0)
|
|
```
|
|
|
|
Calling this “hardware voice status” would be an overclaim. The explicit bank,
|
|
handle stop/release, failed play and engine timer pause still matter. The baseline
|
|
port's prepared-file-duration clock is closer to the ordinary one-shot source
|
|
clock than an SDL queue-empty predicate would be, but differs in integer boundary,
|
|
source duration identity, pause/clock ownership, invalid handles and dispatch order.
|
|
|
|
## Implementation consequence and remaining gate
|
|
|
|
Do not replace CAM/MCA completion with SDL queued bytes merely because source
|
|
polls a handle. First model source channel state (duration milliseconds, elapsed,
|
|
repeat, stop/invalid handle and engine clock pause), recover47D060 allocation/
|
|
play failure and source sound+44 derivation, then connect director completion to
|
|
that state. Independent SDL transport can remain the output mechanism. Current
|
|
duration/leftover-dt director behavior stays explicitly approximate until that
|
|
contract is tested. This bounded correction changes the C6 plan, not gameplay yet.
|